Japanese License Plate Universal Set PE Metal

This universal set will fit most 1:18 models with plate frame size of W: 18.2mm x H: 9mm

These license plates require assembly! These come as displayed in image 12

1 set consists of:

• 1x PE Metal sheet (1 sheet has 10 plates, 15 hex bolts, 5 plate seals)
• 1x Decal sheet of your choosing

PE License plate size:

• 18.2mm width
• 9mm height

Available plate sets

• Random assortment Type A (Vehicle Private Use)
• Random assortment Type B (Vehicle Private Use)
• Random assortment Type C (Vehicle Private Use)
• Random assortment Type D (Vehicle Private Use)
• Random assortment Type E (Vehicle under 660cc, commercial use vehicles)
• Random assortment Type F (Temporary use)

Each decal set includes 10 license plate (5 for front and 5 for back of vehicle) as well as 5 prefecture seal logos matching the set.

To install

• Apply decals of your choosing
• Apply Tamiya TS-13 clear coat (recommended but not required)
• After paint has dried, apply hex bolts & anti theft seals with their corresponding decals
• Trim license plate from PE sheet
• Apply glue to back of PE plate and place on your model

The PE sheet is pre-processed with the following steps:

• Cleaned with acetone
• 1 coat VMS Metal Prep 4K
• 3 coats Tamiya White Primer 300087044
• 1 coat Tamiya clear TS-13

Alternatively to the included PE bolt heads, we can suggest the use of our resin detailing bolts "Hexagon bolt 0.7mm"
______

Check out our two other variations linked below

Japanese License plate Simple Decal set HERE

DIY Japanese License Plate Set with PE backing HERE

This listing does not include the displayed model or other parts. These are displayed as example purpose only.
This product is in 1/18 scale. For hobby use only. Requires assembly
© TK DIECAST